Help your friends get prepared by sharing!

Archive for April, 2017

How to Easily Restore Cast Iron Skillets

How to Easily Restore Cast Iron Skillets

Screen Shot 2016-02-11 at 1.10.07 PM
Choose the Right Pan

Some cast iron skillets are coated with special compounds that make it more resistant to corrosion, regulate temperatures better and provide a non-stick surface. Never use this re-seasoning method with any cast iron products that have been treated with any additives. It can corrode the material, damage the pan and possibly release toxic fumes or create other types of hazards.

 

Wear Protection

This trick involves the use of lye-based oven cleaners, and these are very caustic. It’s important to follow the directions on the label and take precautionary steps. However, you should always adhere to the following guidelines as well:

 

Always wear eye protection, put on a surgical face mask and wear thick rubber cleaning gloves. You should also consider wearing long sleeves and jeans as well as an apron to protect exposed skin if you get splattered. Fill the bucket up with water BEFORE adding the oven cleaner. If you place the lye in first, you will create a chemical reaction that can be very toxic, messy and dangerous. Putting in water first ensures that the mixture will be stable and safe to work with.

 

Screen Shot 2016-02-11 at 1.10.13 PM

 

The Bucket Method

Fill a bucket with five gallons of hot water and add about a pound of lye-based oven cleaning powder or liquid. Specific ratios will vary from product to product, but expect to something similar to these proportions.   Mix the ingredients with a toilet brush, long wooden spoon or other similar tool. The water will become murky and keep mixing until everything is thoroughly blended together.

 

Grab the skillet by the handle, with your rubber gloves on, and gently lower it into the bucket. Try to let the end of the skillet rest on the bottom of the bucket before lowering the handle into the liquid. This will minimize the chances of splattering and potential injury. Let go of the handle just before it reaches the water. If you get your glove wet, make sure to immediately rinse it with warm water until it washes off. Do not take off the glove to do this, and make sure that you don’t touch any part of your body or clothing with the tainted glove. Once it’s clean, you can remove the gloves and proceed to the next step.

 

Cover the container with a lid and let the pans soak for about four days. Take another bucket and fill it with three gallons of water and pour in a ½ to ¾ gallon of vineger and mix. Put on the rubber gloves and retrieve the pans from the cleaning bucket and place them into the vinegar and water. The vinegar will neutralize the lye and make it safe to touch once the pans and gloves have been soaked in the water.

 

Let the pans soak for a few minutes before taking to the sink and to finish the cleaning process. You will notice that the vast majority of residue and grime will be gone, and most of what remains can easily be removed with some cleanser and steel wool or pot scrubber.

Screen Shot 2016-02-11 at 1.10.20 PM

The Bag Method

Take the pans into a well-ventilated area and wear the protective gear as mentioned above. Spray the pans with a lye-based FOAM oven cleaner. Make sure that you cover all of the skillet and the level of foam is consistent across the surface. Place the skillets into plastic kitchen garbage bags, one to each bag, tie them off and let sit on a concrete surface for two to three days.   Check the pans to see how much grime is left, and feel free to add another coat of oven cleaner and let soak for an additional day or two if necessary.

 

Remove the slimy, greasy and gooey residue that will now be present on the surface of the pans with any type of towel. Make sure that you are wearing the gloves during this process. Discard the towels immediately after use.

 

Fill a bucket with enough warm water to completely submerge the pans. Add vinegar at a ratio of two parts water to one part vinegar. Gently place the pans into the water and let soak for about an hour. This will help to neutralize the cleaning solution while also helping to eat away at rust and other imperfections on the pans.   Remove and wipe the pans completely dry.

 

Screen Shot 2016-02-11 at 1.10.24 PM

 

Seasoning

There are differing opinions as to how to best season the cast iron. You can either heat-treat the pans before applying some lard, or you can apply some olive oil to them without using the oven. Chances are that heat treating will provide a longer cure, but if you are seasoning the pans after each use, then chances are that rust will not be a big problem.

 

Cold oil seasoning is easy. Just take some olive oil and rub it all over the pan. Wipe away any excess until there is a slightly-moist coating all over the surface.

 

If you choose to heat-treat the pans, place them in a 250 degree oven for about 15 minutes. Then raise the heat to 500 degrees and let the pans sit for about 45 minutes to an hour. Turn off the oven and remove the pan. Rub the lard over the hot surface with a generous coating. The heat from the pan will cause it to smoke and break down. This is normal and part of the curing process. Wipe away any excess drippings and return the pan to the oven, upside down. Let the pan cool naturally before giving it another wipe before putting it away.

 

Try both of these methods out and see how these simple steps can restore almost any cast iron skillet. You will be amazed at how you can bring these items back to life without exerting a lot of effort from scrubbing and scraping.

 

GRID_BOB_NEW_BF_ADS-9

How To Make A Smokeless Campfire

How To Make A Smokeless Campfire

Smokeless-Campfire-Tips

Screen Shot 2015-12-22 at 9.25.54 AM

Screen Shot 2015-12-22 at 9.25.54 AM

Make your next camping trip or other outdoor adventure more enjoyable with this simple, yet incredibly effective tip. This easy to follow video shows two separate techniques that when combined can be used to make a virtually smokeless campfire… allowing for a more pleasurable time when lounging around the fire, doing some outdoor cooking, warming yourself on those chilly nights, or simply hanging out with friends singing campfire songs and eating S’mores.
The following is a quick look at the 2 techniques covered:
1) Basic fire making skills and principles. Also known as the “fire triangle”, the 3 vital elements that any good fire needs for maximum combustion and efficiency are Fuel, Heat, & Oxygen. Get this combo correct and you’ll never want for lack of a hot and clean burning fire! **Particularly useful to know when learning survival skills, or in an emergency.
2) How to make an easy fire pit that not only helps control the direction of where any residual smoke flows, but also reflects the maximum amount of heat back toward you.

GRID_BOB_NEW_BF_ADS-12