Help your friends get prepared by sharing!

Archive for March, 2016

Vital Info to Understanding the Process of Rehydration

Vital Info to Understanding the Process of Rehydration

Screen Shot 2016-02-09 at 9.12.57 AM

Small Doses

The body absorbs water better when it is introduced steadily over time.  Drinking a gallon of water after spending a day in the hot sun is going to lead to more waste and potentially overwhelm systems in the body.  This particularly true when it comes to the kidneys.  Some people suggest that kidneys should be processing anywhere between 12-18 ounces of water per hour.

I don’t know if this is true or not, but introducing too much water in the system at once can cause it to go into overdrive, which can actually lead to kidney damage or even renal failure in some extreme cases.   The digestive system can also be thrown into chaos if too much water is ingested at one time after dehydration.

The best thing to do is to provide a steady supply of water that is consumed over time in order to allow the body to properly re-absorb fluids.  Otherwise, you may end up doing more harm than good while also wasting most of the excess water through urination.

Screen Shot 2016-02-09 at 9.12.57 AM

Sports Drinks

Sports drinks contain additives that are intended to replenish minerals and other nutrients that get lost through sweat.  However, many of them are also designed to make you thirsty so that you buy and drink more of their products.  Drinking a quart over the period of an hour is all you need to give the body an initial jolt back into rehydration.  Compliment additional fluid intake with water.

You can also make your own by mixing ½ teaspoon of salt with 6 teaspoons of sugar for every quart of water.  This will help the body to replace fluid that has been lost between and within cells.

Screen Shot 2016-02-09 at 9.12.57 AM

How Water is Lost

The best way to understand how to rehydrate the body is to see how it releases fluids in the first place.  The first way that the body produces water for sweat is by excreting it from the blood.  In fact, blood volume can decrease up to 25% during periods of exertion.  The body then releases water from spaces between cells to offset this reduction and provide additional fluid for sweat.  Finally, the body will release water that is within cells if necessary.  This is also where most of the water in the body is stored.

As you rehydrate yourself, the reverse happens.  The blood gets more water, then supplies are replenished in the spaces between cells before cells themselves get rehydrated.  While you will feel the effects of rehydration almost immediately, it can take hours for water to re-enter cells and levels to reach equilibrium.  Consequently, if you gulp a lot of water in one sitting, it may help to satisfy the need to replenish fluids in the blood and around cells, but fail to replenish fluid loss within cells.

This is where the sugar/salt mixture comes in to play.  This helps to unlock the membranes around cells  so that water gets reabsorbed.  However, it takes time.  So, even if you feel better and begin to perk up after being dehydrated, your cells will still be in the process of recharging depleted supplies long after you start drinking again.

Screen Shot 2016-02-09 at 9.12.57 AM

Urine is Misleading

The color of your urine can be a good indicator of when you are getting dehydrated as it gets darker when the body conserves water.  However, clear urine during rehydration is not necessarily an indicator that supplies have been replenished.  Frequent urination is not necessarily an indicator that your water levels are optimal after dehydration as well.

Remember that the body can only process so much water at any given point in time.  Any excess is removed through urination, and you can lose a lot of water before it is absorbed properly.  Think of how anti-freeze or coolant overflows from a radiator if you pour too much in at once.  It takes time for the water to enter the system and fill the internal chambers.  This is why the only way to really fill a radiator is to pour in fluid slowly.  The same happens with our bodies.  Frequent urination that appears clear may simply be a sign that you’re overflowing as opposed to absorbing water.

Screen Shot 2016-02-09 at 9.12.57 AM

Keep Cool

One of the best things that you can do to properly rehydrate yourself is to rest, remove excess clothing, take a shower and stay out of the heat.  This will reduce stress on the body, minimize continual sweating and allow the water that you are ingesting to properly work its way through the system.

Under normal circumstances, adults should be drinking between 8-10 glasses of water per day.  This can double or even triple when under periods of extreme exertion or exposure to high heat or intense sunlight.  However, it’s important to drink consistently throughout the day in order to maximize the body’s ability to reabsorb water.

Get into a cooler place, relax, and drink a couple of glasses of water per hour throughout the day in order to maximize the effectiveness of your rehydration efforts.  Remember that you may feel less thirsty, your eyes will be moist again, your nose will not feel dry and you will perk up after drinking a glass or two of water when you are dehydrated.  However, the body still needs time for water to work its way through the system and replenish depleted supplies.


How to Make a Cheap and Effective Manual Vacuum Sealer

How to Make a Cheap and Effective Manual Vacuum Sealer

Screen Shot 2016-02-09 at 9.12.57 AM

Required Items

1 syringe

2 feet of aquarium air tubing

1 aquarium “T” connector

2 aquarium check valves

Some tape

Pair of scissors

Heavy-duty plastic zipper baggies

Screen Shot 2016-02-09 at 9.12.57 AM

Assembling the Tubing, Connector and Valves

Screen Shot 2016-03-31 at 3.19.56 PM

The first step is to take the tubing and cut out three sections that are 2-3 inches in length each.  Attach one piece to each end of the T connector by twisting and placing firm, downward pressure over the tips.  Next, attach the input side of one of the check valves on the line that makes the stem of the T connector.  Attach the output side of the other check valve on one of the other two lines that make the top part of the T.  Each valve will have some form of identifier that indicates which is which.

The next step is to attach the syringe to the remaining open line on the T connector.  Make sure that you are using a syringe that has a fitting that will be big enough so squeeze into the line and create a secure fit.  Keep in mind that the size of the syringe that you choose will also influence how much suction can be generated as you remove air from the bags.  Larger syringes will remove more air than smaller ones in a single pull.

Screen Shot 2016-02-09 at 9.12.57 AM

Preparing the Bag

Screen Shot 2016-03-31 at 3.17.54 PM

Take a toothpick or nail and poke a hole through the center of the bag, just below the zipper strip.  Make sure that you only make one hole on one side of the bag.  Place the food that you want to store into the bag.  Take the long strip of air tubing and cut one of the ends at an angle so it is pointy.  You will use this to make attaching the tubing to the bag easier.  It will also minimize stretching which can cause air to escape and reduce the force of the suction as you pull the syringe later.

Screen Shot 2016-03-31 at 3.24.40 PM

Feed the tube into the bag, placing it in almost all the way to the bottom.  However, if you are sealing moist items, make sure that the tubing rests above the “water line” as air is drawn out.  Otherwise, you can end up pulling out some of the liquid and creating a huge mess both inside the bag and through out the vacuum assembly.   Seal the zipper lock on the bag after the tubing has been inserted.

All you need to do now is pump the syringe in and out until the air is sucked from the bag.  The second valve that you’ve inserted eliminates the need to have to use a very large syringe or repeatedly detach, depress, reattach and pull the syringe over and over again in order to remove all of the air.  However, you can also use a single line and syringe if you don’t have access to the parts that make this shortcut possible.

In any case, when all of the air is removed, you need to carefully remove the line from the bag while simultaneously plugging the hole with your finger.  Carefully place the tape next to the hole.  Gently remove your finger as you place the tape over the hole.  This may take a couple of tries to get the feel for the process, but the end result should be that you allow minimal air to enter the bag as you seal up the hole.

Try this trick out and see how it can really improve the shelf life of many foods without the need for a vacuum sealing machine.  It will also help to conserve space as it compresses the items inside the bag as well.  Nothing could be easier, and you can enhance your food storage options by taking a couple of minutes to prepare this vacuum system that can be used over and over again.